OptiSpray AP01.1 Application Pump 1015447

Application pump OptiSpray AP01.1 1015447 AP01 1010300

The Application pump is intended for conveying coating powder (no enamel) to the powder gun.

The application pump operates only in combination with the OptiStar CG12-CP CG24-P (automatic equipment) or the OptiStar CG11-P CG23-P Control unit (manual equipment).

The application pump will only operate in combination with the OptiGun GA03-P automatic gun or with other Gema models with a suitable diffuser (spraying air adapter).

OptiSpray AP01.1 Application pump 
 
OptiSpray AP01.1 Application pump – complete (pos. 1-14, 24, 27)  1015 447 
1  Allen cylinder screw – M5x130 mm  1010 431 
2  Upper end piece  1010 428 
3  Filter element – 3 µm, complete  1014 060# 
4  Allen cylinder screw – M5x35 mm  1005 185 
5  Filter element body  1010 046 
6  Pinch valve hose – DN7.5  1017 438# 
6.1  Braided sleeve – fit-up aid kit for pos. 6 (not shown)  1005 270 
7  Allen cylinder screw – M5x65 mm  244 759 
8  Bushing  1010 433 
9  Upper pinch valve housing  1010 429 
10  Lower pinch valve housing  1010 432 
11  Fluid blocking ring  1010 354# 
12  O-ring – Ø 26x2 mm  246 549# 
13  Valves assembly – complete (without pos. 14)  1010 305 
14  Body – complete (for pos. 13)  1015 456 
15  Nut with kink protection – M16x1-Ø 12 mm  1005 443 
16  Elbow connection  1010 051 
17  Allen cylinder screw – M5x20 mm  222 950 
18  Allen cylinder screw – M4x12 mm  216 275 
19  O-ring – Ø 10x2 mm  243 000# 
20  Plug  1010 052 
21  O-ring – Ø 16x2 mm  1007 794# 
22  Suction tube  1010 053 
23  O-ring – Ø 6x1 mm  217 115# 
24  Connection/plug  200 859 
25  Screw-in nipple – 1/8"-Ø 8 mm  1010 378 
26  Hose connection – Ø 11.5/7 mm  1019 542 
27  O-ring – Ø 7x1.5 mm  1013 549# 
30  Powder hose suction side – Ø 4.5 mm (not shown)  1005 454* 
31  Powder hose transport side – Ø 11.5/7 mm (not shown)  1005 097* 
32  Plastic tube – Ø 8/6 mm, blue  103 497* 
33  Plastic tube – Ø 8/6 mm, black  103 152* 
34  Plastic tube – Ø 8/6 mm, green  103 519* 
40  Hose connection – Ø 8.1/4.5 mm  1010 372 
41  O-ring – Ø 8x1.5 mm  248 878# 
42  Adaptor  1010 370 
43  Nut with kink protection – M12x1-Ø 8 mm  201 316 
44  Maintenance set – pos. 3 (2x), 6 (2x), 6.1 (1x), 11 (2x), 12 (4x), 19 (1x), 27 (1x)  1015 435 

Bangle Machinery manufactures and supplies non-original replacements and original parts and equipment for Gema, Wagner and Nordson powder coating guns and machines.

Non original parts: they are interchangeable products that completely work well with original powder gun and equipment.

Benefits: powder coating cost will be reduced without lower the powder coating performance. Best option of cost-effective alternative.

Original type: imported from original manufacturers.

For more questions, please contact!

Email: matt@banglemachinery.com

Mobile/whatsapp: 0086 18159256561

Contact: Mr. Matt