Optigun GA03 with optistar CG08
Complete set of powder coating gun and control unit
GA03 auto gun 1010198
CG08 control unit 1009299
IG07 powder injector 1007780
The gun, control unit and spare parts are available as parts list:
OptiGun GA03 Automatic powder gun - spare parts list | |
Part Name | Part No. |
OptiGun GA03 Automatic powder gun | 1010 198 |
Powder gun body OptiGun GA03 | 1008 726 |
Gun cable – complete 20 m | 1008 663 |
Cylinder screw – M8x50 mm | 235 113 |
Washer – Ø 8.4/20x2 mm | 215 880 |
Quick release connection – NW5, Ø 6 mm | 200 840 |
Cable tie with Velcro closure | 303 070 |
Cleaning brush – Ø 12 mm | 389 765 |
Powder hose – Ø 16/11 mm | 105 139 |
Electrode rinsing air hose – Ø 6/4 mm | 103 144 |
Powder tube – complete | 1008 644 |
Powder tube | 1008 641 |
O-ring – Ø 12x1 mm, FPM75 | 1006 324 |
Hose holder | 1008 642 |
Clamp ring | 1008 643 |
Gun fixture | 1008 711 |
Ground plate | 1011 457 |
SuperCorona connection | 1009 764 |
Cylinder screw – M5x6 mm | 263 907 |
Cascade – complete | 1007 231 |
Shaft (without cascade) | 1008 675 |
OptiGun GA03-X – Extension tube 700 | 385 484 |
Gun cable – complete, 11 m | 1008 661 |
Gun cable – complete, 15 m | 1008 662 |
SuperCorona ring – complete | 1009 761 |
Angled body PA03-90° – complete | 1009 139 |
Angled body PA03-60° – complete | 1009 138 |
Angled body PA03-45° – complete | 1009 137 |
Threaded sleeve | 1007 229 |
Gun extensions L = 150 mm without nozzle | 1008 616 |
Gun extensions L = 300 mm without nozzle | 1008 617 |
Powder hos (antistatic) Ø 11/16 mm | 105 139 |
Powder hos (antistatic) Ø 12/18 mm | 1001 674 |
OptiStar CG08(-C) Gun control unit spare parts list | |
OptiStar CG08(-C) Gun control unit | |
OptiStar CG08 Gun control unit – complete | 1009299 |
OptiStar CG08-C Gun control unit – complete | 1009300 |
Cover | 1008301 |
OptiStar CG08(-C) – Front plate and power pack | |
Front plate - complete (pos. 1-12) | 1009860 |
Front plate with foil keyboard (pos. 5-8) | 1009859 |
OptiStar Mainboard V2.0 - complete | 1009844 |
Spacer sleeve - Ø 3.1/6x15 mm | |
PCB Powerboard V2.0 | 1009865 |
Spacer sleeve - Ø 3.2/6x7 mm | |
Front frame - complete (incl. pos. 5.1) | 1007048 |
Special screw | 1007019 |
Special screw – M4x20/7 mm | 1003000 |
Front plate gasket | 1007042 |
Spacer sleeve - Ø 3.6/7x5 mm | |
Display | 1007044 |
Washer - Ø 3.2/7x0.5 mm | |
Locknut - M3 | |
Power pack - 24 VDC | 1009849 |
OptiStar CG08(-C) – inside rear wall | |
Rear panel gasket | 1007033 |
CAN-Bus Modul – komplett (nur CG08-C) | 1009068 |
Elbow plug-in connection - Ø 8-Ø 8 mm | 230995 |
Solenoid valve - Ø 8-Ø 8 mm, NW 3.4, 24 VDC | 1003914 |
Motor throttle - complete | 1000064 |
Plastic tube - Ø 8/6 mm | 103152 |
Fluidizing pad - 1/8"a | 237264 |
Cap screw - M4x16 mm | 216801 |
OptiStar CG08(-C) connections | |
Quick release connection – NW5, Ø 6 mm | 200840 |
Hose - Ø 6/4 mm | 103144 |
Nut with kink protection – M12x1 mm, Ø 8 mm | 201316 |
Supplementary air hose - Ø 8/6 mm (black) | 103756 |
Quick release coupling for supplementary air hose | 261637 |
Nut with kink protection – M12x1 mm, Ø 8 mm | 201316 |
Conveying air hose - Ø 8/6 mm (red) | 103500 |
Quick release coupling for conveying air hose | 261645 |
Quick release connection – NW 5 mm | 1004272 |
Hose - Ø 8/6 mm | 103756 |
CAN bus cable – 0.5 m (CG08-C only) | 1002655 |
CAN bus cable – 4.5 m (CG08-C only) | 387592 |
CAN bus cable – 5.5 m (CG08-C only) | 388521 |
CAN bus cable – 6.0 m (CG08-C only) | 388530 |
Bus terminal resistor (not shown) (CG08-C only) | 387606 |
Mains cable – 4.5 m | 1002563 |
Bangle Machinery manufactures and supplies non-original replacements and original parts and equipment for Gema, Wagner and Nordson powder coating guns and machines.
Non original parts: they are interchangeable products that completely work well with original powder gun and equipment.
Benefits: powder coating cost will be reduced without lower the powder coating performance. Best option of cost-effective alternative.
Original type: imported from original manufacturers.
For more questions, please contact!
Email: matt@banglemachinery.com
Mobile/whatsapp: 0086 18159256561
Contact: Mr. Matt